Refrigeration TechnologyRefrigeration Technology0023-124X2782-4241Eco-Vector10451210.17816/RF104512Research ArticleApplication of absorption chillers in air conditioning systemsKokorinO. Ya.<p>Doctor of Engineering Sciences, Prof.</p>info@eco-vector.comKronfeldYa. G.info@eco-vector.comLevinI. E.info@eco-vector.comMGSUCJSC "Venta""Train Technologies"1507200190721230603202206032022Copyright © 2022, Kokorin O.Y., Kronfeld Y.G., Levin I.E.2022<p>At enterprises in many industries, technological processes are accompanied by thermal emissions in the form of steam, condensate and hot water with temperatures up to 80 C. In the cold season, such emissions can be used to supply heating and ventilation systems, as is done at some facilities. However, in In most cases, heat is discharged into the atmosphere.The result is environmental pollution, as well as condensation of the vapor-air mixture on the surface of the walls of buildings, which leads to their destruction.Unfortunately, such environmentally unacceptable emissions occur at confectionery factories located in the center of Moscow[ *]. However, many technological processes need cold, and sometimes both cold and heat at the same time. It is most rational to use thermal emissions to generate cold. This process can be implemented using modern absorption refrigeration machines. Such machines are manufactured by TRANE Corporation - one of the world's leading in this direction. The first absorption chiller built by TRANE had a cooling capacity of 200 kW. A long experience in design, research and operation formed the basis for the creation of a wide range of absorption lithium bromide refrigerating machines with a nominal cooling capacity from 390 to 6000 kW.</p>refrigeratorheat exchangerpipelineхолодильная машинатеплообменниктрубопровод