Increasing the efficiency of manufacturing products from dolerite of the Severo-Buskunskoye deposit by gluing them with polymer composites

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Рұқсат ақылы немесе тек жазылушылар үшін

Аннотация

The North Buskun dolerite deposit is located 10 km from Sibai RB. This deposit belongs to highly decorative stones, which is due to the uniformity and saturation of its black color and good polishability. At the same time, the main disadvantage of the North Baksan deposit is the low yield of usable products from mined blocks, which is approximately 35% of the extracted stone. The paper examines the types of cracks on the dolerite and the possibility of gluing them with polyester-based glue. It has been established that sawn blanks do not break through glued small cracks when they are ground and polished on a knee-lever machine. At the same time, frost resistance, color, tonality, uniformity, quality of polishing and stuffing of drawings on glued blanks with small cracks practically did not differ from the indicated quality indicators in areas of dolerite without defects.The restoration of the quality indicators of the dolerite of the North Baksan deposit due to the gluing of small cracks with polymer composites ensured an increase in the yield of usable products from 35 to 85%.

Негізгі сөздер

Толық мәтін

Рұқсат жабық

Авторлар туралы

G. Simakov

Ufa University of Science and Technology

Хат алмасуға жауапты Автор.
Email: gnsimakov@yandex.ru

Candidate of Sciences (Engineering), Sibay Institute (branch) 

Ресей, 21, Belova Street, Sibaj, 453830, Respublika Bashkortostan

R. Utarbaev

Ufa University of Science and Technology

Email: raifutarbaev@mail.ru

Senior Lecturer, Sibay Institute (branch) 

Ресей, 21, Belova Street, Sibaj, 453830, Respublika Bashkortostan

G. Tujsina

Ufa University of Science and Technology

Email: gulfia77@mail.ru

Candidate of Sciences (Pedagogical), Sibay Institute (branch) 

Ресей, 21, Belova Street, Sibaj, 453830, Respublika Bashkortostan

Әдебиет тізімі

  1. Kaposhko I.A. Study of decorative features and material composition of dolerites of the south of the Siberian platform. Vestnik of Irkutsk State Technical University. 2004. No. 2 (18), pp. 156–157. (In Russian).
  2. Kaposhko I.A. Dolerit is a rock and its use in jewelry design. LAP LAMBERT Academic Publishing. 2014. 152 p.
  3. Tutakova A.Ya. Comparative analysis of methods for determining the qualitative characteristics of the facing stone of the Karelian Isthmus. Zapiski Gornogo Instituta. 2006. No. 1, pp. 41–44. (In Russian).
  4. Buryanov A.F., Krivenko V.V., Zhukov A.D., Moiseenko K.S., Asamatdinov M.O. Imitations of marble. Stroitel’nye Materialy [Construction Materials]. 2016. No. 4, pp. 102–104. (In Russian).
  5. Buryanov A.F., Krivenko V.V., Zhukov A.D. Physicochemical nature of marble decoration. Stroitel’nye Materialy [Construction Materials]. 2015. No. 11, pp. 78–80. (In Russian).
  6. Dubinina L.P. Development of technologies for the production of decorative products from artificial marble based on aggregates of the Jamagat quarry. Gornyi informatsionno-analiticheskii byulleten’. 2004. No. 9, pp. 73–76. (In Russian).
  7. Krivenko V.V., Ovchininsky D.V., Weinstein M.M., Buryanov A.F., Goncharov Yu.A. Donkey marble: ancient traditions and modern technologies. Stroitel’nye materialy [Construction Materials]. 2008. No. 8, pp. 16–18. (In Russian).
  8. Simakov, G.N., Allaberdin A.B., Utarbaev R.M. Experience in the manufacture of agglomerate stones on clinker-polymer binder. Experience in the implementation of the Federal State Educational Standard in educational institutions: materials of the XI Russian Scientific and Practical Conference, Sibay: sbornik materialov XI Vserossiiskoi nauchno-prakticheskoi konferentsii. – Sibai: Izdatel’skii Dom “Respublika Bashkortostan”, 2020, pp. 62–69.
  9. Simakov G.N., Daineko S.N. Increasing the efficiency of production of natural stone products by sizing them with polymer composites. Gornyi zhurnal. 2008. No. 1, pp. 57–59. (In Russian).
  10. Kaldybaev N.A., Sultanaliev A., Sultanov I. Methodology for studying the fracturing of the massif of facing stone. Nauka i novye tekhnologii. 2009. No. 7, pp. 15–18. (In Russian).
  11. Pavlov I.V. Methods and devices for detecting granite fracturing in the process of blending blocks. Inzhenernyi vestnik Dona. 2015. No. 2–2 (36). (In Russian). http://www.ivdon.ru/uploads/article/pdf/IVD_113_Pavlov.pdf_64e3e63e99.pdf
  12. Karachentsev N.V. Himija dlja kamnja / Kratkii obzor. Versiya 1.2. [Chemistry for stone / Brief overview. Version 1.2.]. Moscow: ALMIR. 2012. 42 p.

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Types of defects on sawn blanks of dolerite samples: a – sample without defects; b – sample with a small crack (web); c – sample with a medium crack

Жүктеу (855KB)
Метадеректер
3. Fig. 2. Percentage ratio of sawn blanks with different types of defects: a – blanks without defects; b – blanks with small cracks (webs); c – blanks with medium cracks; d – total

Жүктеу (86KB)
Метадеректер
4. Fig. 3. Printing a pattern on a sample with a glued small crack

Жүктеу (331KB)
Метадеректер

© ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2024