Improvement of construction and technological properties of cement hardening systems for building composites

Capa

Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Acesso é pago ou somente para assinantes

Resumo

The article provides information on the formation of hardening systems of building composites (STSC) as a result of directional structure formation and the involvement of the active component of metallurgical slags. It is shown that the structures of the STSC can be represented as a consequence of formation (design and synthesis) of the structures of the particle addition system of the raw material mixture, and for more complex technologies – as a growth system. The main physico-chemical properties and characteristics of modifying additives for STSC are considered. The influence of slag additives on the main construction and technological properties of hardening systems based on man-made raw materials has been established. Special attention is paid to the kinetics of the grinding capacity of the designed hardening systems of building composites.

Texto integral

Acesso é fechado

Sobre autores

М. Goncharova

Lipetsk State Technical University

Autor responsável pela correspondência
Email: magoncharova777@yandex.ru

Doctor of Sciences (Engineering) 

Rússia, 30, Moskovskaya Street, Lipetsk, 398055

А. Sverdlov

Lipetsk State Technical University

Email: smidt48@mail.ru

Engineer 

Rússia, 30, Moskovskaya Street, Lipetsk, 398055

М. Sdvizhkov

Lipetsk State Technical University

Email: maksimsdv@mail.ru

Engineer 

Rússia, 30, Moskovskaya Street, Lipetsk, 398055

А. Chigasov

Lipetsk State Technical University

Email: astarta_office@mail.ru

Engineer 

Rússia, 30, Moskovskaya Street, Lipetsk, 398055

I. Rybina

Finansial University under the Government of the Russian Federation

Email: innarybina@yandex.ru

Candidate of Sciences (Economics) 

Rússia, 49/2, Leningradskiy Avenue, Moscow, 125167, Russian Federation

Bibliografia

  1. Akulova I.I., Artamonova O.V., Goncharova M.A. et al. Scientific school of the academician of the RAASN Ye.M. Chernyshov (in memory of a teacher). Part 1. Development of fundamental problems of materials science of building compositesi // Russian Journal of Building Construction and Architecture. 2022. No. 4 (56), pp. 50–60. EDN: EIGHJS. https://doi.org/10.36622/VSTU.2022.56.4.005
  2. Goncharova M.A., Zamyshlyaeva L.V., Al-Surrayvi H.G.H. Modification of cement hardening systems by using energy-efficient technological additives of domestic production. Stroitel’nye Materialy [Construction Materials]. 2023. No. 1–2, pp. 50–54. (In Russian). https://doi.org/10.31659/0585-430X-2023-810-1-2-50-54
  3. Bocharnikov A.S., Goncharova M.A., Komarichev A.V. Composite materials on the basis of cement-water activated systems for injecting compaction of concrete of enveloping structures. Stroitel’nye Materialy [Construction Materials]. 2015. No. 5, pp. 31–34.
  4. Goncharova M.A., Gorin R.A., Karaseva O.V. The formation of composite curing systems based on technogenic raw materials. Solid State Phenomena. 2018. Vol. 84, pp. 1058–1062. https://doi.org/10.4028/www.scientific.net/SSP.284.1058
  5. Goncharova M.A., Korneev K.A., Dedyaev G.S. Improving construction engineering properties of soils stabilized by a cement binder with techno-genic products. Solid State Phenomena. 2020. Vol. 299, pp. 26–31. https://doi.org/10.4028/www.scientific.net/SSP.299.26
  6. Fedyuk R.S., Mochalov A.V., Lesovik V.S. Modern methods of activation of binder and concrete mixtures (review). Vestnik of the Engineering School of the Far Eastern Federal University. 2018. No. 4 (37), pp. 85–99. (In Russian). https://doi.org/10.5281/zenodo.2008670
  7. Al-Surrayvi H.G.H, Goncharova M.A., Zaeva A.G. Synthesis of composites on the basis of local raw materials under the influence of aggressive environment. Stroitel’nye Materialy [Construction Materials]. 2021. No. 5, pp. 69–74. (In Russian). https:// doi.org/10.31659/0585-430X-2021-791-5-69-74
  8. Zawal D., Grabiec A. M. Influence of selected mineral additives on properties of recycled aggregate concrete (RAC) considering eco-efficiency coefficient. Case Studies in Construction Materials. 2022. Vol. 17. e01405. https://doi.org/10.1016/j.cscm.2022.e01405
  9. Prajna S.P., Anjum M.I., Lakshmi P.S., Gayathri G., Beulah M., Sudhir M.R. A comprehensive investigation of the effect of mineral additives to bituminous concrete. Materials Today: Proceedings. 2021. Vol. 46, pp. 714–721. https://doi.org/10.1016/j.matpr.2020.12.090
  10. Rakhimov R.Z. Building complex, Ecology and mineral binders. Izvestiya of higher educational institutions. Construction. 2022. № 2 (758), pp. 5–15. (In Russian). https://doi.org/10.32683/0536-1052-2022-758-2-5-15
  11. Golewski G.L. An extensive investigations on fracture parameters of concretes based on quaternary binders (QBC) by means of the DIC technique. Construction and Building Materials. 2022. Vol. 351. 128823. https://doi.org/10.1016/j.conbuildmat.2022.128823
  12. Smirnova O.M., Kazanskaya L.F. Hybrid cements based on granulated blast furnace slag: the main directions of research. Expert: theory and practice. 2022. № 3(18), pp. 59–65. (In Russian). https:// doi.org/10.51608/26867818_2022_3_59
  13. Russo F., Eskandarsefat S., Venturini L., Viscione N. A complete study on an asphalt concrete modified with graphene and recycled hard-plastics: A case study. Case Studies in Construction Materials. 2022. Vol. 17. e01437. https://doi.org/10.1016/j.cscm.2022.e01437
  14. Amran M., Onaizi A.M., Qader D.N., Murali G. Innovative use of fly ash-finely powdered glass cullet as a nano additives for a sustainable concrete: Strength and microstructure and cost analysis. Case Studies in Construction Materials. 2022. Vol. 17. e01688. https://doi.org/10.1016/j.cscm.2022.e01688
  15. Bos F.P., Menna C., Pradena M., Kreiger E., Leal da Silva W.R., Rehman A.U., Weger D., Wolfs R.J.M., Zhang Y., Ferrara L., Mechtcherine V. The realities of additively manufactured concrete structures in practice. Cement and Concrete Research. 2022. Vol. 156. 106746. https://doi.org/10.1016/j.cemconres.2022.106746
  16. Abdulfattah O., Alsurakji I. H., El-Qanni A., Samaaneh M., Najjar M., Abdallah R., Assaf I. Experimental evaluation of using pyrolyzed carbon black derived from waste tires as additive towards sustainable concrete. Case Studies in Construction Materials. 2022. Vol. 16. e00938. https:// doi.org/10.1016/j.cscm.2022.e00938
  17. Odeyemi S.O., Atoyebi O.D., Kegbeyale O.S., Anifowose M.A., Odeyemi O.T., Adeniyi A.G., Orisadare O.A. Mechanical properties and microstructure of High-Performance Concrete with bamboo leaf ash as additive. Cleaner Engineering and Technology. 2022. Vol. 6. 100352. https:// doi.org/10.1016/j.clet.2021.100352

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar

Declaração de direitos autorais © ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2024