卷 90, 编号 10 (2001)

Properties and effectiveness of use of single- and two-phase secondary refrigerants arc compared. The advantages of two-phase cooling media ensuring a higher value or heat-transfer coefficient are shown. It this case the amount of cooling medium in the system is reduced, thi distance of cold transportation is increased and refrigeration losses in main pipelines are reduced.

The article describes the conversion of lur^t ammonia compressors AO-600 and AKG-56» lubrication-free operation. Design of pistons has been changed for this purpose: steel welded and cast aluminium pistons of lightweight construction have been developed. A procedure for putting of supporting-guide rings from the materials AFC 80BC and F4K20 on a piston has been developed. Comparative tests of seals and supporting rings from these materials have been carried out. Asa result of the investigations large ammonia refrigerating compressors AO-1200 217 without lubrication of cylinders and glands have been developed and their commercial production was started.

The principal technical solutions for a typical mini-factory commissioned by ZAO-Sigma-gas in the town of Peterhof (Saint-Petersbourg) on the basis of previous liquefaction plant are presented.

To increase refrigerating capacity of the main1 throttle separation cycle an external refrigerating circuit for high pressure gas hased on a two-stage freon refrigerating machine K-127 was used.

An increase in working pressure of the cycle I from 120-140 bar to 180—190 bar with the substitution of the recuperative heat exchanger I for the heat exchanger developed by ООО I Intellect was also a contributing factor in essential increase in refrigerating capacity о the installation.

The Prostor-L company has been operating on the Russian market since 1996. If at the beginning of its activity it specialized in sales of filling and packaging equipment for the production of ice cream and dairy products, today it is the leader among domestic manufacturers of technological equipment, including refrigeration, for various branches of the food industry. The company has its own production base - a workshop with an area of ​​​​more than 2000 m2 with tool, welding and procurement, assembly, electrical installation, painting and packaging areas, a large warehouse for finished products and a warehouse for components. The equipment manufactured by Prostor-L goes along the technological chain from the stage of the working drawing to packaging in containers and sending it to the consumer. This process allows you to control the quality of equipment manufacturing at any stage of production. Prostor-L manufactures and supplies a wide range of equipment using components directly from manufacturers, which allows you to solve technical problems of any complexity, ensuring complete completeness, minimum terms and optimal the price of the supplied equipment. Among the main suppliers are well-known European companies: Bitzer, Copeland, Mycom, Giintner, Carly, Danfoss, Herl, Alfa Laval, Eliwell, Omron, ABB, Legrand, Allen-Bradley, etc.

One of his contemporaries wrote: "Interests turn into boundaries with age." Perhaps for some this is the case. But the "Specialized Production Plant SNOW" with age only expands the boundaries, the boundaries of its technical and geographical capabilities. The participation of "SPK SNEG" in the recent exhibition "Fish Industry-2001" can serve as confirmation of this. The General Director of SPK SNEG, MIKHAIL ALEKSEEVICH BOGOMOLNIKOV, tells

In the period from 19 to 21 September this year in Yuzhno-Sakhalinsk was held the next V International Exhibition-Fair "Fish Industry-2001".
It was organized by the State Committee of the Russian Federation for Fisheries together with the administration of the Sakhalin Region.